Low Power Mode; Position Of The Grounding Screw - Advantech ICR-4461 User Manual

All metal parts, including the box, are connected together with the negative pole of the
power supply (common pole). If recommended for the installation environment, protect the
router by grounding it properly by the grounding screw, see Figure 17.

2.7 Low Power Mode

In applications requiring low power consumption (such as solar power - not 7/24 mode)
is strictly recommended to use LPM mode prior to powering down the entire router.
LPM (Low Power Mode) is a router mode where the router is in sleep mode with minimal
power consumption; see Chapter
from this mode by a signal applied to the BIN1 input or after a predetermined period of time.
Putting the router into LPM mode can be done using the lpm command, see
Scripts application note for more details.
Figure 17: Position of the Grounding Screw
4.1 for the LPM consumption. The router can be woken up
21
ICR-4461
Commands and