Table of Contents
Advertisement
2.5 SFP Cage
A hot-pluggable (SFP) network interface module with a speed of up to 10 Gbps can be
settled into the ETH2 SFP cage.
Installing an SFP Module
To install a SFP module, see Figure
• You should use the bale clasp if the SFP module is equipped with it. If so, close the
clasp before inserting the SFP module.
• Hold the SFP module with the hardware label facing up.
• Insert the SFP module into the ETH2 slot and gently push on it until it snaps into the slot
tightly.
See Table
6
for a list of successfully tested SFP modules on the product.
Model
SFP-GSM-20K
ML-S+31Dout-10
S-3553LC20D
SFP-PLUS-LR10-HPE
SFP-TXCIS
TXM431-LR(UN)
UF-RJ45-1G
15
and follow these steps:
Figure 15: SFP Module Installation
Manufacturer
Advantech
MaxLink
MikroTik
Hewlett Packard
OEM
TP-Link
Ubiquiti
Table 6: Tested SFP Modules
19
ICR-4461
Advertisement
Table of Contents
