5
|
About the units and options
Installer reference guide
30
▪
The addendum book for optional equipment
WLAN module (BRP069A71)
A WLAN cartridge (to be plugged into the MMI) is delivered as indoor unit
accessory. Alternatively (e.g. in case of weak signal strength), you can install the
optional wireless LAN module BRP069A71.
For installation instructions, see the installation manual of the WLAN module and
the addendum book for optional equipment.
Universal centralised controller (EKCC8-W)
Controller for cascade control.
Bizone kit (EKMIKPOA or EKMIKPHA)
You can install an optional bizone kit.
For installation instructions, see the installation manual of the bizone kit.
See also:
▪
"6.2.3 Multiple rooms – Two LWT
4
▪
"Bizone
kit" [
213]
Connection kit for third‑party tank (EKHY3PART)
Required when connecting a third-party tank to the system.
Contains a thermistor and a 3-way valve.
For installation instructions, see the installation manual of the connection kit.
Connection kit for third‑party tank with built‑in thermostat (EKHY3PART2)
Kit for the connection of a third‑party tank with built‑in thermostat to the system.
The kit converts a thermostat demand from the tank to a domestic hot water
request for the indoor unit.
Conversion kit (EKHBCONV or higher)
Use the connection kit to convert a heating only model to a reversible model.
For installation instructions, see the installation manual of the conversion kit.
Domestic hot water tank
For providing domestic hot water, a domestic hot water tank can be connected to
the wall-mounted indoor unit.
The following domestic hot water tanks are available:
Tank
Stainless steel tank (standard):
▪
EKHWS150D3V3
▪
EKHWS180D3V3
▪
EKHWS200D3V3
▪
EKHWS250D3V3
▪
EKHWS300D3V3
4
zones" [
43]
Remark
Inclusive booster heater
EPRA14~18DAV3+W1 + ETBH/X16EF6V+9W
Daikin Altherma 3 H HT W
4P644736-1 – 2021.02