Daikin Altherma 3 H HT W EPRA14DAV3 Installer's Reference Manual page 213

Export MMI settings
Bizone kit
EPRA14~18DAV3+W1 + ETBH/X16EF6V+9W
Daikin Altherma 3 H HT W
4P644736-1 – 2021.02
About exporting the configuration settings
Export the configuration settings of the unit to a USB memory stick, via the MMI
(the user interface of the indoor unit). When troubleshooting, these settings can
be provided to our Service department.
# Code
[9.N] N/A
To export MMI settings
1 Open the front panel (1) and the user interface panel (2) (see
"7.2.5 To open the indoor
1
2
2 Insert a USB memory stick.
3
3 On the user interface, go to [9.N] Export MMI settings.
4 Select OK.
5 Remove the USB memory stick and close the user interface
panel and front panel.
Bizone kit installed
# Code
[9.P.1] [E-0B]
Description
Your MMI settings will be exported
to the connected storage device:
▪ Back
▪ OK
4
unit" [ 71]):
Description
Bizone kit installed:
▪ 0 No : The system only has a main zone.
▪ 1 N/A
▪ 2 Yes: A bizone kit is installed in order to add
an additional temperature zone.
10 Configuration
|
—
—
—
Installer reference guide
213