Advanced Settings - HIKVISION DS-E00HQHI-XB Series User Manual

Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
5. Click Apply.
6. Restart the video recorder to activate the new settings.

6.5.5 Advanced Settings

Steps
1. Go to Configuration → Record → Advanced .
2. Configure the parameters as your desire.
Overwrite
Disable: When the HDD is full, video recorder will stop writing.
●
Enable: When hard drive is full, video record will continue to write new files by deleting the
●
oldest files.
Enable HDD Sleeping
HDDs which are free of working for a long time will turn into sleep status.
Save Camera VCA Data
Camera VCA data will be saved so that you can search it.
Note
Disabling Save Camera VCA Data will delete the existing Dual-VCA and motion detection
information, and stop analyzing and storing Dual-VCA and motion detection information.
Alarm Storage
When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing alarm information.
Digital Video Recorder User Manual
Figure 6-31 Quota
77