Table of Contents
Advertisement
Ports and Status Indicators
The MS uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash twice. Additional functions are described
below, from left to right.
Function
Power
Solid orange
Flashing white
Solid white
Off
Restore
N/A
Switch Ports
Off
Flashing orange (RJ45 ports only)
Solid green
In addition, there is a RESTORE button available on the front panel.
Insert a paper clip if a device restore is required.
• A brief, momentary press: To delete a downloaded configuration and reboot.
• Press and hold for more than 10 sec: To force the unit into a full factory restore.
Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.
Additional functions on the back panel are described below, from left to right.
Power input
Package contents
In addition to the MS switch, the following are provided:
Wall Mount Kit includes
• Dry Wall Anchors, 2 of each
• Mounting Screw, 2 of each
All manuals and user guides at all-guides.com
LED Status
Power cords may be ordered separately.
Meaning
Switch is unable to connect to the Meraki cloud
Firmware upgrade in process
Switch is fully operational and connected to the Meraki cloud
Switch does not have power
Restore button to clear switch IP and local configuration settings
No link is detected on this port
Activity indicator
1 Gbps link detected
3
Advertisement
Table of Contents
