System Menu - Elation KLF832 User Manual

S YS T E M M E N U
The fixture includes an easy to navigate system menu. The control panel (see image below)
located on the side of the fixture provides access to the main system menu and is where all
necessary system adjustments are made to the fixture. During normal operation, pressing
MODE button once will access the fixture's main menu. Once in the main menu you can
navigate through the different functions and access the sub-menus with the UP and DOWN
buttons. Once you reach a field that requires adjusting, press the ENTER button to activate
that field and use the UP and DOWN buttons to adjust the field. Pressing the ENTER button
once more will confirm your setting. You may exit the main menu at any time without making
any adjustments by pressing the MODE button.
NOTE: To access the LCD Menu Control Display when locked, press and hold the MODE button
for 3 seconds. The LCD Menu Control Display will shut OFF automatically about 1 minute
from the last button press.
STANDALONE
Press the MODE button to access the fixture's main menu. Use the UP and DOWN buttons
to navigate to DMX Settings and press the ENTER button. Navigate to No DMX Status and
press the ENTER button. Navigate to Standalone and press the ENTER button.
SERVICE PORT
This device features a service port on the control panel that can be used to perform
software updates. Please refer to the Software Updates section of this manual for detailed
information.
15