System Menu - Elation SIXPAR 300IP User Manual

SYSTEM MENU

ON-BOARD SYSTEM MENU
The SIXPAR 300IP™ comes with an easy to navigate system menu. The next sections will cover
how to access each menu function.
LCD CONTROL PANEL DISPLAY
The (4) button control panel (see image below) located on back of the fixture allows you to
access the main menu and make all necessary adjustments to the SIXPAR 300IP™.
During normal operation, pressing the MODE button will navigate through the different function
menus. Once you reach a desired menu, press the ENTER button to select that menu. The
variable field that can be adjusted within the selected menu will begin to flash. Using the UP or
DOWN buttons, adjust the field until the desired value is displayed. For example, the CHANNEL
CH: menu variable field can be set to 06, 07, 08, or 12. Pressing the ENTER button once will
confirm your selected value. Exit at any time without making any adjustments by pressing the
MODE button.
INFORMATION DISPLAYED DURING INITIAL POWER ON
When the fixture is initially powered ON, the display shows the following information:
Update SIXPAR 300IP
Wait... 300IP V1.03
*Fixture Software Version (≥)
LCD CONTROL PANEL LOCKOUT
When the Display ON menu is set to OFF1, the LCD display will turn OFF after 30 seconds and
the (4) button Control Panel will be LOCKED. To unlock the (4) button LCD control panel, press
and hold the MODE button for 5 seconds.
16