Troubleshooting Within The Network - Medion Nettop Manual

Troubleshooting within the Network

Why does the network environment not show the releases?
Why does an error message appear when I click on the network envi-
ronment?
It appears that the network boards are unable to communicate. What
might be the problem?
The data transmission is incorrect or very slow. What might be the
problem?
For further hints on troubleshooting refer to the Windows help under "Network errors".
- 38 -
The network environment is delayed in time. Check the release by
searching for the respective computer name.
The computer name must be unique on the network and may
not be the same as the task group.
Maybe one of the used network boards works with a different
speed (e. g. 10 instead 100 Mbit) and your network computer is
unable to recognize this. If necessary, set the network driver to
the compatible speed.
If two Nettop PCs should be linked you require a cross-link ca-
ble, otherwise use a patch cable.
In addition, check the protocols and the configuration.
Maybe you have the wrong cable (UTP / CAT3 or lower) or the
problem is the proximity of a power cord or another source of
interference.
The Network