The Optical Drive; Loading A Disc; Playing Back And Retrieving Data From Discs - Medion Nettop Manual

The Optical Drive

Diagram reference: A1, A2

Loading a Disc:

Attention!
Do not place protective foils or other stickers on your CD's. To avoid dam-
age to your drive, do not use deformed or damaged CD's. Attention: Do
not use scratched or dirty discs, discs with pieces broken off or discs of poor
quality. Because of the high speeds in the drive the discs might break and
damage your data as well as your drive. Examine the discs before you enter
them. If damage or dirt is visible, you should not use them.
Damage caused by faulty media is excluded from warranty and any repair
will be charged.
1. Push the eject button (Diagram reference, A2) on the right of the optical drive to
open the tray.
2. Place the disc on the tray so that it lays flat with the label facing upward.
3. Push the eject button again to close the tray.
Note
Many CD's start automatically when they are inserted. This depends on the
operating system and the corresponding settings.

Playing Back and Retrieving Data from Discs

Your Nettop PC is able to playback and to retrieve Audio CDs, DVD Movies and Data discs.
After loading the disc your operating system will open a selection window with different
options for playback.
If your operating system doesn't open the selection window you still have the possibility of
access via the Explorer or Computer.

The Optical Drive

- 29 -