Advertisement
STOP
Prior to Installation:
Make sure you have all necessary parts by checking the diagram and parts list. If any
·
part is missing or damaged, please contact Kraus Customer Service at 800-775-0703
for a replacement.
Read all instructions and safety warnings and ensure you have all tools, parts, and
·
equipment necessary for a safe installation.
·
Turn off the hot and cold water supply at the angle stops and turn on the old faucet to
release any built up pressure. Remove existing faucet. Clean sink or countertop to
remove any debris, plumber's putty, or silicone.
·
Flush angle stops to release any debris prior to installation.
·
Pre-drilled hole size requirement: 1 3/8" (min) - 1 1/2" (max)
Max countertop thickness without deck plate: 2 1/4"
·
·
Max countertop thickness with deck plate: 1 3/4"
1, 2 or 3 hole installation
·
Care & Maintenance
To keep the product clean & shining, follow the steps below:
1.
Rinse with clean water & dry with a soft cloth
2.
Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3.
Do not use cloth with a coarse surface
4.
Unscrew the aerator and clean when necessary
This installation manual is subject to change without further notice.
R
ACID
3
Advertisement
