Table of Contents
Advertisement
Chapter 8
SC-2056
1
1 To MIO (or other 64-channel E Series device)
2 To SC-2042, SC-2043, SC-2070, CB-50, or BNC-2080
3 Jumper W1
4 To SC-206 X Series or 8-Channel SSR Series
SC-2056 Connection
Warning
Do not connect the SC-2056 to a board for which it is not designed. Such
connection can damage the SC-2056 and any or all boards/accessories connected
to the SC-2056 and host computer. National instruments is
damages resulting from incorrect connections.
SC-205X Series User Manual
2
Figure 8-1. SC-2056 Parts Locator Diagram
Connect your SC-2056 to the DAQ device via an SH100100, R1005050, or
SH96-100 cable, available separately. Make this connection with the host
computer or VXI chassis powered off. Connect one end of the cable to the
SC-2056 at either connector J1, J2, or J3. Connect the other end to the
DAQ device installed in your host computer or VXI chassis.
3
4
8
5 To 5B Series
6 Serial Number
7 Assembly Number
8 Product Name
8-2
5
6
7
liable for any
NOT
© National Instruments Corporation
Advertisement
Table of Contents
