Specifications - dbx DriveRack 240 User Manual

Appendix A
A.5 Specifications
Specifications ( 240 DriveRack™)
Inputs
Number of Inputs:
Connectors:
Type:
Impedance:
Maximum Input Level:
CMRR:
Outputs
Number of Outputs:
Connectors:
Type:
Impedance:
Max Output Level:
System Performance
Type:
Dynamic Range line:
Type IV™ dynamic range:
Sample Rate:
Word length:
Latency:
THD + Noise:
Frequency Response:
Interchannel Crosstalk:
Functions:
Pre EQ
Type:
Range:
Pre Delay
Length:
Crossover
Type:
Filter Type:
Slope:
Post EQ
Type:
Number:
Range:
DriveRack™ User Manual
52
2
XLR, Euroblock
Electronically balanced/RF filtered
>40kΩ
Hardware selectable for +30, +22, +14, dBu
>40 dB typical, >55 dB at 1kHz
4
XLR, Euroblock
Electronically balanced, RF filtered
30Ω
+25.5 dBu into 1kΩ
+22dBu into 600Ω
dbx Type IV™ Conversion System
>105 dB unweighted, 108 dB A-weighted
120 dB with transient material,
A-weighted, 22kHz BW
118 dB with transient material,
unweighted, 22kHz BW
112 dB typical with program material,
A-weighted, 22kHz BW
48kHz
24 bits
74.9 samples typical
0.005% typical at +4dBu, 1kHz, 0dB input gain
20Hz- 20kHz, +/-0.5dB
<-100dB at 1kHz
One 31-band Graphic EQ per input channel, or
9 band Parametric EQ per input channel
Both inputs linkable
+/-12 dB range
1.0 seconds/channel
Both inputs linkable
Wire(1x1, 1x2, 1x3, 1x4) Filter (1x1, 1x2, 1x3, 1x4),
Crossovers: 1x2, 1x3, 1x4, 2x3, 2x4, 2x4(Dual Band)
Butterworth, Bessel, or Linkwitz-Riley
6, 12, 18 or 24 dB/octave for Butterworth or Bessel filters
12 or 24 dB/octave for Linkwitz-Riley filters
Parametric
4 EQ bands per output channel
+/-12 dB range
DriveRack
®
™