Navigating The Pre-Eq Section; Navigating The Post-Eq Section - dbx DriveRack 240 User Manual

Section 2
2.3 Navigating the Pre-crossover EQ Section
To edit the parameters of the EQs used in a selected program, simply use the following procedure. From program mode,
Navigate through the Pages of the selected EQ section by depressing "Next Page" or "Prev Page" successively until arriving at the desired Page.
The EQ button
toggles through
the EQs used in
each channel of
the selected
program
menu.
2.4 Navigating the Post-crossover EQ Section
To edit the parameters of the EQs used in a selected program, simply use the following procedure. From program mode,
Navigate through the Pages of the selected EQ section by depressing "Next Page" or "Prev Page" successively until arriving at the desired Page.
The EQ button
toggles through
the EQs used in
each channel of
the selected
program
menu.
DriveRack™ User Manual
8
Editing Functions
press the Pre-EQ button to reach the EQ module to be edited. Once you have reached the desired EQ,
Successive presses of the Pre-EQ button will move through each channel (input).
Pre-EQ
GEQ On/Off
GEQ
Flatten/Restore
or
Pre-EQ
PEQ On/Off
PEQ
Flatten/Restore
Band 5 Freq
Gain
Q
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
press the Post-EQ button to EQ module to be edited. Once you have reached the desired EQ,
Successive presses of the Post EQ button will move through each channel (output).
Post EQ
PEQ On/Off
PEQ
Flatten/Restore
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Frequency
Gain
Band 3 Freq
Band 1 Freq Band 2 Freq
Gain
Gain Gain
Slope Q Q
Band 8 Freq
Band 6 Freq Band 7 Freq Band 9 Freq
Gain
Slope
Gain Gain
Q
Q Q Level
Type- Band 1 Freq Band 2 Freq
L-Bell/H-Bell, L-Bell/H-Shelf,
Gain Gain
L-Shelf/H-Bell, L-Shelf/H-Shelf,
Q/Slope Q
DriveRack
Band 4 Freq
Gain
Q
Band 9 Freq
Gain
Slope
Band 3 Freq Band 4 Freq
Gain Gain
Q Q/Slope
®
™