Section 3
• Upon pressing the DATA wheel, your new custom configuration will be loaded into the currently
selected program. You must save the program to retain configuration changes before moving to
the next program, or turning the power off.
3.6 Saving Configuration Changes
DriveRack™ User Manual
18
Configuring the DriveRack™
Press DATA
wheel to load
Once changes have been made to the current Configuration, changes can be saved by pressing
the STORE button and the display will appear like this:
NAME:
2Way w/ PEq/GEq
At this point, enter the new name for your configuration. Please see section 3.4 for naming
information. IF you wish to abort at this point, simply press the PROGRAM/CONFIG button.
DriveRack
®
™