Saving Factory Program Changes - dbx DriveRack 240 User Manual

Section 3
3.4 Saving Factory Programs Changes
DriveRack™ User Manual
14
Configuring the DriveRack™
Once you are satisfied with the changes that have been made to a factory or user program, the
DriveRack™ allows you to save these changes to the program as a custom USER program by
simply pressing the STORE button and the display will appear something like this:
NAME:
2Way w/ PEq/GEq
• Rotating the DATA wheel will change the icons on the currently selected position.
• Pressing the DATA wheel will toggle between upper and lowercase letters, numbers or
symbols.
• Use the PREV PG and NEXT PG button to move icon positions.
• Once the desired title has been written, press the STORE button again and the display will
now appear something like this:
1 Replace Old
2 Store New
• If you wish to replace an existing program, press the 1/Pre-EQ button and the unit will ask
you which program you wish to replace. Rotate the DATA wheel to select the program to
be replaced and press the STORE button and the existing program will be replaced with
the new program.
• If you wish to store the program as a new program, press the 2/Post EQ button and the unit
will ask you which program will precede the program. Simply rotate the DATA wheel to
select the preceding program.
• Once either method has been selected, press the STORE button once again, and all edits
will be saved.
The 240 DriveRack will store up to 50 user programs in addition to the 20 factory programs.
Note: Factory programs cannot be over-written. Selecting "REPLACE OLD" will move the pro-
gram index to a user program.
DriveRack
®
™