Section A - Appendix; Technical Specifications - dbx 266xs User Manual

Section A

Section A - Appendix

10
Appendix
A.1 Technical Specifications
Note: 0dBu = 0.775VRMS
INPUT (Balanced or Unbalanced):
Impedance:
Max Level:
OUTPUT (Impedance Balanced):
Impedance:
Max Level:
SIDECHAIN INSERT:
Input Impedance:
Output Impedance:
Max Input Level:
Max Output Level:
FREQUENCY RESPONSE:
Flat:
Bandwidth:
SYSTEM PERFORMANCE:
Distortion + Noise:
Intermodulation Distortion:
Noise:
Dynamic Range:
Interchannel Crosstalk:
Common Mode Rejection:
Stereo Coupling:
THRESHOLD:
Compressor:
Expander/Gate:
RATIO:
Compressor:
Expander/Gate:
ATTACK Time:
Compressor:
Expander/Gate:
RELEASE Time:
Compressor:
Expander/Gate:
POwER SUPPLY:
Operating Voltage:
Power Consumption:
Operating Temperature:
PHYSICAL:
Net Weight:
Shipping Weight:
Dimensions:
Specifications are subject to change
> 40kΩ
+22dBu
+4dBu: Balanced:
Unbalanced:
-10dBu: Balanced:
Unbalanced:
> +21dBu, > +18dBm (into 600Ω)
>10kΩ
2kΩ
+22dBu
>+20dBu
20Hz - 20kHz, +0, -0.5dB
0.35Hz - 90kHz, +0, -3dB
<0.2%; any amount of compression at 1kHz
<0.2% SMPTE
<-93dB, unweighted (22kHz measurement bandwidth)
>114dB, unweighted
<-95dB, 20Hz to 20kHz
>40dB, typically >55dB @ 1kHz
True RMS Power Summing™
OverEasy® or hard-knee; -40dBu to +20dBu
-60dBu to +10dBu
1:1 to Infinity:1
1:1 to 4:1
Scalable Program-Dependent AutoDynamic™
<100μSec
Scalable Program-Dependent AutoDynamic™
Program-Dependent
100VAC -120VAC 50/60Hz; 230VAC 50/60Hz
15 Watts
32°F to 113°F (0°C to 45°C)
4.84 lbs (2.19kg)
6.6 lbs (2.99kg)
1.75" (4.4cm) H x 5.75" (14.6cm) D x 19" (48.26cm) W
dbx 266xs
100Ω
50Ω
1kΩ
500Ω