Table of Contents
Advertisement
FIGURE 10: CONTROL KNOB ASSEMBLY
CONTROL KNOB
INTERNAL RIB
5.0 EXPLANATION TO USER
Following Installation and Commissioning of the water heater the operation
should be fully explained to the user.
5.1 HOT WATER
1. Indicate the location of the water heater and identify the outlets to which
it is connected.
2. Explain how to adjust the temperature and confirm whether the temperature
is locked or not.
3. Explain that the water in the Streamline will expand during heating causing
the tap to drip. This is normal and is not a fault with the Streamline.
5.2 SYSTEM MALFUNCTION
1. Explain how to isolate electrical and water supplies in case of a fault.
2. Explain that a qualified plumber and/or electrician should be contacted
if there is a fault.
3. Explain how to identify/check basic faults.
5.3 SYSTEM MAINTENANCE
Explain the necessity to carry out regular maintenance of the water heater
to ensure its continued safe and efficient operation.
5.4 LITERATURE
Leave the fitting instructions with the user.
EXTENSION
BRASS SPINDLE
11
Advertisement
Table of Contents
