YASKAWA HMI TP-smart Manual page 32

Deployment
Integrated server > Telnet server
Establishing a Telnet con-
nection
Commands
32
The establishing of a Telnet connection is password protected and has the following
approach:
1. Start a Telnet client like for example "MS-DOS console" at your PC and enter the
following into the address bar: telnet IP address.
ð When the connection is established, the smartPanel asks for the user name and
the password.
2. Enter the following:
Login: wince
Password: vipatp (entry is hidden)
ð After entering valid user data a command line for entries appears:
By entering Exit res. closing the window you can terminate the Telnet connection at any
time.
After establishment of a Telnet connection the smartPanel provides you with commands.
A list of possible commands with a short description is available via the command help.
By beginning with "help" before a command you receive help to this command.
HB160 | TP-smart | H71-71A41-0 | en | 23-10
HMI