Advertisement
Quick Links
DETAIL
SANDER
200W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor:
200W
Input:
230-240V ~50Hz
No Load Speed:
15,000/min
Pad Size:
140x140x80mm
Paper Fitment:
Hook & Loop
Power Cord:
2m
Weight:
1.5kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: carbon
brushes, dust bags, backing pads and sanding sheets.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WHAT'S IN THE BOX
Detail Sander
Dust Canister
20 x Sanding Paper
DSR-2000
0918
Advertisement
Related Manuals for Ozito DSR-2000
Summary of Contents for Ozito DSR-2000
- Page 1 Power Cord: Weight: 1.5kg ozito.com.au 20 x Sanding Paper DSR-2000 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
-
Page 2: Know Your Product
KNOW YOUR PRODUCT SETUP & PREPARATION 1. HOOK AND LOOP SANDING SHEET DETAIL SANDER 1 Hook & Loop Sanding Pad 3 Soft Grip WARNING: ENSURE THE TOOL IS DISCONNECTED 2 On/Off Switch 4 Dust Canister Adapter FROM THE POWER SUPPLY BEFORE PERFORMING ANY OF THE FOLLOWING OPERATIONS.. 1 W hen fitting sanding paper, align the holes on the sanding sheet with the holes on the sanding pad. -
Page 3: Operation
OPERATION 2. DUST CANISTER 3. ON/OFF SWITCH Install WARNING: THE TOOL IS RECOMMENDED FOR Push the dust canister onto the dust USE WITH A RESIDUAL CURRENT DEVICE WITH A extraction port. RATED RESIDUAL CURRENT OF 30MA OR LESS. 1 C onnect the tool to the mains power supply. 2 T o turn on, press the ‘I’ button into the housing. - Page 4 RECOMMENDED FOR DRYWALL AND PLASTER SANDING APPLICATIONS. 1 Secure the material to be sanded. 2 F irmly grasp the sander and turn the sander on. 3 L et the motor build up to maximum speed. Gradually lower it onto the workpiece with a slight forward movement. 4 For optimum results, use either of these strokes. Backward/ Forward Side to Side 5 U pon completion of the sanding operation, remove the sander from the workpiece and then turn off the sander. DSR-2000...
-
Page 5: Maintenance
1. To replace, remove the four philips head screws by rotating anti-clockwise. produce a smoother finish. The condition of the workpiece will determine the 2. Place new backing pad on the tool and retighten the four philips head grit of the sandpaper to be used. The higher the grit number, the finer the screws by rotating clockwise. grade of sandpaper. Note: Ozito Industries will not be responsible for any damage or injuries If the surface is rough, start with a coarse grit and sand until the surface is caused by the repair of the tool by an unauthorised person or by mishandling uniform. Medium grit may then be used to remove scratches left by the coarser of the tool. grit. Finer grit is then used to finish the surface. Always continue sanding with each grade of sandpaper until the surface is uniform. -
Page 6: Electrical Safety
Using an Extension Lead Save these instructions and other documents supplied with this tool for future reference. The electric motor has been designed for 230V and 240V only. Always check that the power supply Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the corresponds to the voltage on the rating plate. extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. This tool is double insulated therefore no earth wire is required. GENERAL POWER TOOL SAFETY WARNINGS WARNING! A wrench or a key left attached to a rotating part of the power tool may result Read all safety warnings and all instructions. Failure to follow the warnings and in personal injury.