Maintenance - Stamina CONVERSION II 15-9003C Owner's Manual

OPERATIONAL INSTRUCTIONS
Unlock the Seat from the Rail. Hook the
Handlebar to the steel wire Hook at the front
of the Seat. You can do the following exercises
with your Stamina® Conversion II Recumbent
Bike/Rower.
BUTTOCKS
Be sure to step on the iron Foot Plate.

MAINTENANCE

The safety and integrity designed into the Stamina® Conversion II Recumbent Bike/Rower can only
be maintained when the Stamina® Conversion II Recumbent Bike/Rower is regularly examined for
damage and wear. Special attention should be given to the following:
1. Adjust the TENSION KNOB(27) and verify that it functions properly and the resistance changes.
2. Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the
left pedal has left hand threads and is tightened by turning counterclockwise.
3. Clean the roller tracks in the RAIL(52) with an absorbent cloth.
4. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten
loose nuts and bolts.
5. Verify that the CAUTION LABEL(129) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(129) if it is missing or damaged.
6. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
7. Worn or damaged components must be replaced immediately or the Stamina® Conversion II
Recumbent Bike/Rower removed from service until repair is made.
8. Only Stamina Products supplied components should be used to maintain/repair the Stamina®
Conversion II Recumbent Bike/Rower.
9. Keep your Stamina® Conversion II Recumbent Bike/Rower clean by wiping it off with an absorbent
cloth after use.
Be sure to step on the iron Foot Plate.
17
LEG STRETCH
LEG EXTENSION