Advertisement
Storage
1. To store the Folding Upper & Lower Body Cycle, simply keep it in a clean dry
place.
2. The minimum folded dimensions of the Folding Upper & Lower Body Cycle are
approximately 16.4" long x 14.4" wide x 5.6" tall. Please measure your Folding
Upper & Lower Body Cycle if exact dimensions are needed.
3. To move the Folding Upper & Lower Body Cycle, lift the unit by the upright of the
MAIN FRAME(1).
Caution: Make sure that the hub on the MAIN FRAME(1) has cooled before moving.
4. To fold, refer to illustration A, remove the LOCKING KNOB(15), and fold the FRONT
FRAME(2) to the MAIN FRAME(1). Reattach the LOCKING KNOB(15) to the
FRONT FRAME(2). The Folding Upper & Lower Body Cycle should appear as
shown in illustration B after folded.
A.
Maintenance
The safety and integrity designed into the
be maintained when the
damage and wear. Special attention should be given to the following:
1. A light oil is applied to the pedals of your Folding Upper & Lower Body Cycle
before shipping. Reapply oil if the pedals begin squeaking.
2. Verify that all nuts and bolts are present and properly tightened. Replace missing
nuts and bolts. Tighten loose nuts and bolts.
3. Verify that the CAUTION LABEL(26) is in place and easy to read. Call Stamina
Products immediately at 1-800-375-7520 for a replacement CAUTION LABEL(26) if
it is missing or damaged.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is
performed.
5. Worn or damaged components must be replaced immediately or the Folding Upper
& Lower Body Cycle removed from service until repair is made.
6. Only Stamina Products supplied components should be used to maintain/repair the
Folding Upper & Lower Body Cycle.
7. Keep your Folding Upper & Lower Body Cycle clean by wiping it off with an
absorbent cloth after use.
Folding Upper & Lower Body Cycle
Folding Upper & Lower Body Cycle
5
can only
is regularly examined for
B.
Advertisement
