Installation; Wall Mounted - Project EV EVA-07S-SE-C User Manual

Installation

Wall Mounted

3.1 Mount on a wall
3.1.1 Open the packaging, you'll see a charge point, a mounting bracket, a user manual
Mount on a Wall
and a bag of mounting accessories. There is also an RFID card if the charge point is
RFID version. For cabled version, a cable hooker is also included inside.
1. Open the packaging, you'll see a charge point, a mounting bracket, and a bag of
mounting accessories. There is also an RFID card (where applicable), if the charge point is
an RFID version.
abled
re for
abled
re for
2. Remove the mounting bracket from the charge point, use it as a template to mark the
3.1.2 Remove the mounting bracket from the charge point, use it as a template to mark
ped with position of the 10mm drill holes. Drill the holes and hammer the expansion bolts in the
the position of the drill holes. Use the expansion bolts from the accessories bag and
accessories bag into the holes. Then use the fixings provided to fit bracket to wall.
hammer these into the drilled holes. Then x the mounting bracket onto the wall.
3.1 Mount on a wall
3.1.1 Open the packaging, you'll see a charge point, a mounting bracket, a user manual
and a bag of mounting accessories. There is also an RFID card if the charge point is
RFID version. For cabled version, a cable hooker is also included inside.
3.1.2 Remove the mounting bracket from the charge point, use it as a template to mark
the position of the drill holes. Use the expansion bolts from the accessories bag and
hammer these into the drilled holes. Then x the mounting bracket onto the wall.
III. Installation and wiring
III. Installation and wiring
7
7
10