Scheduling A Charge - Project EV EVA-07S-SE-C User Manual

Project EV Standard App

Scheduling a charge

When the chargepoint status is preparing, the user can use the preset charging
scheme and the reserved charging function by selecting Pre-Set charging.
When charging, the preset charging scheme, the amount of charge, the amount of
consumption, the duration of charging, the charging rate, and the current voltage are
displayed.
Preset charging scheme and reservation function
You can make an appointment to charge according to the amount, amount of
electricity, and duration. For example, if the preset power is 20kwh, the charge point
will automatically stop charging when the charging power reaches 20kwh.
Only one of the three charging schemes can be selected to take effect at 1 time:
Click the cost to set the preset amount. When the preset amount is reached, the
charger stops charging.
Click the energy to set the preset power. When the preset power is reached, the
charger stops charging.
Click the time to set the preset time. When the preset duration is reached, the charger
stops charging.
34