Fujitsu PRIMERGY PG-FC202 User Manual page 73

7
Double-click [QueueTarget] in [Adapter Parameters].
8
Set "1" (fixed value) in [Value] in [Modify Adapter Parameter], and
click [Apply].
9
Click [LinkSpeed] in [Adapter Parameters].
10
Select the value from the list box to [Value] in [Modify Adapter
Parameter], and click [Apply].
For the setting values, refer to the ETERNUS Server Connection Guide, etc.
When there are two or more cards, and the setting for each card will be changed separately,
perform the procedures from Step 2 to 10 for each card.
11
Check the parameters that have been set.
The set values are displayed in [Value].
If the parameter is displayed in red, the setting is not applied. Click [Apply].
• When Topology: 0 / QueueDepth: 8 / QueueTarget: 1, common for all cards
12
When the settings for all the card finishes, select [Exit] from [File]
menu, and exit HBAnyware Utility.
After exiting HBAnyware Utility, perform "5.2 Registry Setting" ( pg.74).
5 Card Detailed Setting
E
73