Fujitsu PRIMERGY PG-FC202 User Manual page 56

Installing Storport Miniport Driver
1
Click the [Start] button
Management] in this order.
2
Click [Device Manager].
3
Select [Fibre Channel controller] or [Emulex **********] in the
"SCSI and RAID controllers" or "Other devices" list and double-
click it.
4
Click the [Driver] tab and click [Update Driver].
[Welcome to the Hardware Update Wizard] starts.
If the [Can Windows connect to Windows Update to search for software?] window appears,
select [No, not this time] and click [Next].
5
Check [Install from a list or specific location], and click [Next].
6
Select [Don't search, I will choose the driver to install], and click
[Next].
When the [Hardware type] screen appears, select [SCSI and RAID controllers] and click
[Next].
7
Click [Have Disk].
8
Insert the driver disk (CD-ROM) into the CD-ROM drive.
9
Specify the following folder in the CD-ROM drive for [File copy
source of the manufacturer], and click [OK].
• For 32Bit
• For 64Bit
The [Display compatible hardware] window appears.
10
Select [Emulex LightPulse HBA - Storport Miniport Driver], and
click [Next].
Installation starts.
11
Click [Finish].
12
Check that the driver version is "*.1.30.9".
56
Close the property window if the displayed name is "Emulex LightPulse *****,
Storport Miniport Driver", and the driver version is "*.1.30.9" because the above
information shows that the driver has already been installed.
[CD-ROM drive]: \Drivers\W2K3\Storport\x86
[CD-ROM drive]: \Drivers\W2K3\Storport\x64
→
[Administrative Tools]
→
[Computer