Serial Number And Rating Label Location; Selecting A Location And Connecting Input Power For 115 Vac Model - Miller Millermatic 140 Auto-Set Owner's Manual

4-7. Serial Number And Rating Label Location

The serial number and rating information for this product is located on back. Use rating label to determine input power requirements and/or rated output.
For future reference, write serial number in space provided on back cover of this manual.

4-8. Selecting A Location And Connecting Input Power For 115 VAC Model

18 in.
(460 mm)
.
A complete Parts List is available on-line at www.MillerWelds.com
!
Do not move or operate
unit where it could tip.
18 in.
(460 mm)
1
2
1 Grounded Receptacle
A 115 volt, 20 ampere individual
branch circuit protected by time-delay
fuses or circuit breaker is required.
2 Plug From Unit
Select extension cord of 14 AWG
for up to 50 ft (15 m) or 12 AWG for
50 up to 200 ft (61 m).
!
Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
804 681-A
OM-225 311 Page 17