Section 4 − Installation; Serial Number And Rating Label Location; Selecting A Location - Miller Axcess 300 Owner's Manual

4-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the back. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.

4-2. Selecting A Location

Movement
!
Location
Special installation may be required where gasoline or volatile
liquids are present − see NEC Article 511 or CEC Section 20.
18 in.
(460 mm)
SECTION 4 − INSTALLATION
OR
1
!
Tipping Do not move or operate
unit where it could tip.
2
!
1
3 Use lifting forks to move unit.
Extend forks beyond opposite side
of unit.
2
Use cart or similar device to move
unit.
3
Locate unit near correct input
power supply.
18 in.
(460 mm)
Do not stack units. Beware of
tipping.
Lifting Forks
Hand Cart
Line Disconnect Device
loc_2 3/96 -Ref. 803 667-A
OM-216 967 Page 13