Section 5 − Installation; Serial Number And Rating Label Location; Dimensions And Weight; Selecting A Location - Miller AlumaPower 350 MPa Auto-Line Owner's Manual

5-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the rear panel. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.

5-2. Dimensions And Weight

Hole Layout Dimensions
A 11-3/4 in. (298 mm)
B 1-11/16 in. (42 mm)
C 15-3/4 in. (400 mm)
D 19-3/32 in. (485 mm)
E 8-11/16 in. (221 mm)
F 1-17/32 in. (39 mm)
G 1/4-20 UNC -2B thread
Weight
80 lb (36.3 kg)
93.5 lb (42.4 kg) w/optional 115
VAC

5-3. Selecting a Location

!
Do not move or operate unit
where it could tip.
Location
18 in.
(460 mm)
OM-240 712 Page 14
SECTION 5 − INSTALLATION
F
D
C
B
1
3
18 in.
(460 mm)
A
E
G
12-1/2 in.
(318 mm)
804 801-A
1
Movement
2
24 in.
(610
mm)
17 in.
(432 mm)
1 Lifting Handles
Use handles to lift unit.
2 Hand Cart
Use cart or similar device to move
unit.
3 Line Disconnect Device
Locate unit near correct input
power supply.
!
Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
loc_2 3/96 - Ref. ST-151 556 / Ref. 803 691-C