Removing Mig Gun From Welding Power Source - Miller Millermatic 140 Auto-Set Owner's Manual

.
A complete Parts List is available on-line at www.MillerWelds.com

4-13. Removing MIG Gun From Welding Power Source

Open Pressure Assembly
Cut Off End Of Wire
Knob
.
Hold wire tightly to keep it
from unraveling.
Loosen Knob, Disconnect Gun Trigger
Rewind Wire Onto Spool, Fasten
Plug, And Pull Gun From Unit
End Of Wire To Spool
Ref. 802 982-A / Ref. 243 861-A
OM-225 311 Page 21