Section 4 − Specifications; Serial Number And Rating Label Location; Unit Specifications; Environmental Specifications - Miller 300577001 Owner's Manual

4-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the rear panel. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.

4-2. Unit Specifications

Type of Input Welding Power
Power Source Type
24 Volts AC Constant Voltage (CV)
Single-Phase DC With 14-Pin And
10 Amperes Contactor Control
50/60 Hertz
* See Section 5-7 for detailed information on wire type, wire size, and wire feed speed.

4-3. Environmental Specifications

A. IP Rating
This equipment is designed for indoor use and is not intended to be used or stored outside.
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
C. Temperature Specifications
Operating Temperature Range
14 to 104°F (−10 to 40°C)
OM-286683 Page 12
SECTION 4 − SPECIFICATIONS
Wire Feed Speed*
Standard:
55 To 770 ipm
(1.4 To 19.6 mpm)
Wire Diameter
Welding Circuit Rating
Range
.035 To 5/64 in. 100 Volts,
(0.9 To 2 mm) 600 Amperes, 100%
Duty Cycle
Max Spool
Capacity:
18 in. (457 mm)
Max Spool
Weight: 60 lb
(27 kg)
IP Rating
IP2X
Storage/Transportation Temperature Range
−4 to 131°F (−20 to 55°C)
Overall
Weight
Dimensions
Length: 27 in. 48 lb
(686 mm) (21.8 kg)
Width: 12-1/2 in.
(318 mm)
Height: 14 in.
(356 mm)
IP2X 2014−06
ce-emc 3 2014-07
Temp1_016- 08