P-Sensor Board; Removing The P-Sensor Board - Dell P93F Service Manual

P-sensor board

Removing the P-sensor board

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the secondary M.2
4. Remove the base cover.
5. Remove the battery.
6. Remove the SIM card.
7. Remove the secondary
8. Remove the WLAN card.
9. Remove the WWAN card.
10. Remove the primary M.2
11. Remove the keyboard
12. Remove the keyboard.
13. Remove the SD card reader.
14. Remove the GPU power
15. Remove the GPU card.
16. Remove the primary memory.
17. Remove the heat-sink
18. Remove the inner frame.
19. Remove the system board.
20. Remove the speakers.
21. Remove the middlecap.
22. Remove the display assembly.
23. Remove the display bezel.
24. Remove the display panel.
About this task
The figure indicates the location of the P-sensor board and provides a visual representation of the removal procedure.
before working inside your
SSD.
memory.
SSD.
lattice.
cable.
assembly.
computer.
Removing and installing components 111