Display Bezel; Removing The Display Bezel (Non-Touch) - Dell P93F Service Manual

Next steps
1. Install the display assembly.
2. Install the middlecap.
3. Install the speakers.
4. Install the power-adapter
5. Install the system board.
6. Install the inner frame.
7. Install the heat-sink assembly.
8. Install the GPU card.
9. Install the GPU power
10. Install the SD card reader.
11. Install the power button
12. Install the touchpad button.
13. Install the power button board
14. Install the smart card
15. Install the keyboard.
16. Install the keyboard lattice.
17. Install the SIM card.
18. Install the primary memory.
19. Install the WWAN card.
20. Install the WLAN card.
21. Install the secondary memory.
22. Install the primary M.2
23. Install the battery.
24. Install the base cover.
25. Install the secondary M.2
26. Install the SD card.
27. Follow the procedure in

Display bezel

Removing the display bezel (non-touch)

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the secondary M.2
4. Remove the base cover.
5. Remove the battery.
6. Remove the SIM card.
7. Remove the secondary
8. Remove the WLAN card.
9. Remove the WWAN card.
10. Remove the primary M.2
11. Remove the keyboard
12. Remove the keyboard.
13. Remove the GPU power
14. Remove the GPU card.
15. Remove the primary memory.
16. Remove the heat-sink
17. Remove the inner frame.
18. Remove the system board.
19. Remove the speakers.
20. Remove the middlecap.
port.
cable.
or power button assembly with fingerprint
or power button board assembly with fingerprint
reader.
SSD.
SSD.
after working inside your
before working inside your
SSD.
memory.
SSD.
lattice.
cable.
assembly.
reader.
computer.
computer.
reader.
Removing and installing components 95