Palm Rest; Removing The Palmrest - Dell P93F Service Manual

2. Install the system board.
3. Install the heat-sink assembly.
4. Install the keyboard.
5. Install the keyboard lattice.
6. Install the SIM card.
7. Install the primary memory.
8. Install the WWAN card.
9. Install the WLAN card.
10. Install the secondary memory.
11. Install the primary M.2
12. Install the battery.
13. Install the base cover.
14. Install the secondary M.2
15. Install the SD card.
16. Follow the procedure in

Palm rest

Removing the palmrest

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the secondary M.2
4. Remove the base cover.
5. Remove the battery.
6. Remove the SIM card.
7. Remove the secondary
8. Remove the WLAN card.
9. Remove the WWAN card.
10. Remove the primary M.2
11. Remove the keyboard
12. Remove the keyboard.
13. Remove the power button board
14. Remove the smart-card
15. Remove the touchpad
16. Remove the power button
17. Remove the SD card reader.
18. Remove the GPU power
19. Remove the GPU card.
20. Remove the primary memory.
21. Remove the heat-sink
22. Remove the inner frame.
23. Remove the system board.
24. Remove the power-adapter
25. Remove the speakers.
26. Remove the middlecap.
27. Remove the display assembly.
About this task
The picture below shows the palmrest after performing the pre-removal parts procedures for any palm rest replacement.
SSD.
SSD.
after working inside your
before working inside your
SSD.
memory.
SSD.
lattice.
or power button board assembly with fingerprint
reader.
buttons.
or power button assembly with fingerprint
cable.
assembly.
port.
computer.
computer.
reader.
reader.
Removing and installing components 93