3. Carefully align the two clips on the memory shield with the slots on the computer chassis and insert the clips under the
chassis.
4. Place the memory shield above the memory module.
5. Replace the (M2x3) screw to secure the memory shield to the memory module.
Next steps
1. Install the keyboard.
2. Install the
keyboard
lattice.
3. Install the battery.
4. Install the
base
cover.
5. Install the
SD
card.
6. Follow the procedure in
Inner frame
Removing the inner frame
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
7. Remove the
primary M.2
About this task
The figure indicates the location of the inner frame and provides a visual representation of the removal procedure.
48
Removing and installing components
after working inside your
before working inside your
SSD.
computer.
computer.