Camera Shutter Cap; Removing Camera Shutter Cap - Dell P93F Service Manual

Steps
1. Place the display hinge in its slot on the display assembly.
2. Replace the eight (M2.5x2.5) screws to secure the display hinge to the display assembly.
Next steps
1. Install the display panel.
2. Install the display bezel.
3. Install the display assembly.
4. Install the middlecap.
5. Install the speakers.
6. Install the system board.
7. Install the inner frame.
8. Install the heat-sink assembly.
9. Install the GPU card.
10. Install the GPU power
11. Install the SD card reader.
12. Install the keyboard.
13. Install the keyboard lattice.
14. Install the SIM card.
15. Install the primary memory.
16. Install the WWAN card.
17. Install the WLAN card.
18. Install the secondary memory.
19. Install the primary M.2
20. Install the battery.
21. Install the base cover.
22. Install the secondary M.2
23. Install the SD card.
24. Follow the procedure in

Camera shutter cap

Removing camera shutter cap

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the secondary M.2
4. Remove the base cover.
5. Remove the battery.
6. Remove the SIM card.
7. Remove the secondary
8. Remove the WLAN card.
9. Remove the WWAN card.
10. Remove the primary M.2
11. Remove the keyboard
12. Remove the keyboard.
13. Remove the SD card reader.
14. Remove the GPU power
15. Remove the GPU card.
16. Remove the primary memory.
17. Remove the heat-sink
18. Remove the inner frame.
106 Removing and installing components
cable.
SSD.
SSD.
after working inside your
before working inside your
SSD.
memory.
SSD.
lattice.
cable.
assembly.
computer.
computer.