Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ribao HCS-25
Summary of Contents for Ribao HCS-25
- Page 1 High Speed Coin Counter HCS-25 User Manual...
- Page 2 Matters needing attention: Dear customer, thank you very much for choosing products from Suzhou Ribao Technology Co., LTD. Dedicated to provide you with good pre-sale, sale, after-sales service. The contents of this instruction manual will be updated as required without prior notice. The company owns the copyright, without the company's permission shall not be copied, forwarded, translated.
-
Page 3: Table Of Contents
Contents Contents ............................3 1. Introduction and intended use ....................4 1.1 Safety information ..........................4 1.2 Warnings ............................4 2.Machine overview ........................5 2.1 Front / Rear view ..........................5 2.2 User interface ............................ 6 3. Installation ..........................7 3.1 Environment and working space ....................... -
Page 4: Introduction And Intended Use
Do not touch the coin disc when it is in operation. Take extra care of long hairs or loose clothing (e.g. tie). If it is caught in the machine, switch off the power immediately. Unplug the HCS-25 from wall outlets before cleaning. Do not clean the machine with chemical cleaner and do not use blowing gas. Otherwise parts can be damaged or explosion / flash may occur. -
Page 5: Machine Overview
2．Machine overview 2.1 Front / Rear view Coin tray Coin guide Coin disc Coin thickness adjuster Display Keyboard Coin diameter adjuster Right top cover （service access） Reject exit Count exit with Quick-change Switch Tray support rod Network LAN Ethemet Carry handle USB port Power socket Printer port... -
Page 6: User Interface
2.2 User interface 2.2.1 Display Time Batch level (1 or 2) Number or Value of counted coins Memory （Total of saver counts） Selected channel Number of coins in bag Function keys Denomination （in Value mode） 2.2.2 Key chart Description Normal key stroke 3 seconds key stroke Start/ Stop Start or stop counting... -
Page 7: Installation
Make sure the HCS-25 has proper electrical grounding. The main fuse protection must be minimum 1,5A. Install the HCS-25 where no one can step on it or trip over the line cord, and the line cord cannot be damaged. The seat area must be stable, solid, and smooth. -
Page 8: Bag, Reject Cup Installation
3.2 Bag, Reject device installation The HCS-25 has one counting and one reject exit. The counting exit is provided to clamp a coin bag on it, but can be also used for the optional tubing kit. On the reject exit a cup or a bagging unit can be attached. - Page 9 Before you start counting, set always the thickness and diameter according the coin size you want to count. Note: Smaller coins will rejected but larger coins will stay in the machine and may cause jams. Thickness adjuster Diameter adjuster If tokens or other coins need to be count, those are not marked on the scale, set the correct size as follow: a) Thickness Open the right top cover.
-
Page 10: Coin Preparation
4．Coin preparation Before loading coins into the machine inspect and remove all foreign objects. Also sort off damaged, lubricated or sticking coins. a) Insert the coin guides on the tray. b) Make sure the support rod of the tray is vertical aligned. Warning possible machine dump 5. -
Page 11: Screen Display
This function is disabled by default and does not need to be modified. 5.3 Counting mode Press “2” to change between Piece or Value counting 5.4 Batch selection The HCS-25 has three stop levels: Batch 1: Individual stop number for every denomination Batch 2: One stop number for all denominations Off: Non stop 5.5 Quantity/Batch Setting... -
Page 12: Operation
Press “On/Off” key to start the count, or push the coin exit to activate the Quick-change switch. The HCS-25 shows the counted quantity or value. When the count is finished the machine stops automatically. (You can also press “On/Off” or push again the coin exit to stop the count manuall. - Page 13 It is now possible to Print the count Save the count into the memory Clear the count and bag content C (long): Clear the count memory of this denomination On/Off: Count more coins The machine stops with “B1 Stop” if the pre-selected stop is reached. The count will automatically transferred to the memory and the bag content counter will set to zero.
-
Page 14: Memory
6.3.1 Add Memory The HCS-25 adds automatically full bags to the memory. When a count is finished and a bag stop is not reached, it is possible to accumulate the count to the memory by pressing “M”. After pressing “M”... -
Page 15: Bag Stop
Note: A steady stop in “Batch 1” must be entered in the Setting menu, option “Deno/Batch setting”. 6.4.2 Clear incomplete bag When you install an empty bag without a request of the HCS-25, you must clear the batch content. Otherwise the counter does not start with “0”, which may lead to a wrong batch stop. -
Page 16: Maintenance
For optimum performance and error free operation, cleaning must be performed regularly. High usage requires more frequent maintenance! CAUTION: Always turn off and unplug the power cord before maintaining the HCS-25. Daily cleaning: Remove the dirt from the coin track. Wipe the dust away under the counting sensor. Use a soft brush and a lint-free cloth. -
Page 17: Troubleshooting
8. Trouble shooting In case of an error event, the HCS-25 stops and shows an error message. The messages and locations are explained below. When the error is solved, confirm the message and press On/Off to count further. When the error appears repeatedly and you cannot fix that problem, please call the service and tell them the error message. -
Page 18: Specifications
Display 3” colour LCD Options see „Accessories” 10. Accessories Included in delivery: Power cord, user manual, number scales, reject box and reject bagging unit. Copyright © 2019 RIBAO TECHNOLOGY CO., LTD. User Manual Edition 3, 08/2020 Page 18 of 18...