Date & Time:
Enter numbers with numeric keypad and press On/Off to save and exit
Factory Default: Press "2" and confirm with "1" to reset all settings (e.g. denom. values and bag stops)
5.2 Screen display
This function is disabled by default and does not need to be modified.
5.3 Counting mode
Press "2" to change between Piece or Value counting
5.4 Batch selection
The HCS-25 has three stop levels:
Batch 1: Individual stop number for every denomination
Batch 2: One stop number for all denominations
Off:
Non stop
5.5 Quantity/Batch Setting
For example, to set the denomination and the preset quantity, select the place to be modified through
number "0" and number "1", and then click number "2" to enter. Set the denomination and quantity by
number "0"-number "9", then click "MEMORY" to save, and press "START/STOP" twice to return to the
main interface.
Page 11 of 18