Table of Contents
Advertisement
5.6 Background services
Figure 1
Figure 2
Figure 3
Figure 1: After clicking "Service counter" to enter, you can view the total historical counting
number
Figure 2: The total historical counting is 5;
Figure 3: If you need to clear the historical data, press number "2" to enter, press the "CLEAR"
key, and enter the initial password: 1308 to clear the data.
6. Operation
Before counting make always sure the selected settings, denominations and count memories meet
your approbations.
6.1 Select Denomination
a) Adjust the thickness and diameter knob to the desired coin size and mount an empty coin bag on the
counting exit.
b) Press the "0" key several times until the requested denomination / coin number appears.
If the count or bag content were not zero, there will be a warning message: "Are you sure you want to
proceed". If you press "1" (Yes) the two counters will automatically cleared. With "2" (No) the coin number
will not be changed.
After the last coin number "9" a total symbol " " appears. It represents the sum of all saved counts and
cannot used for counting.
6.2 Counting
Press "On/Off" key to start the count, or push the coin exit to activate the Quick-change switch. The
HCS-25 shows the counted quantity or value. When the count is finished the machine stops
automatically. (You can also press "On/Off" or push again the coin exit to stop the count manuall.
Page 12 of 18
Advertisement
Table of Contents
