ICON Pro-Form 85 CSX User Manual page 7

STEP 4
Pull the handlebar wire (25) out of the hole of
upright post (17) ,then Put the handlebar (24)
onto the upright post (17) by using washer (23)
and inner hex bolt(16).
STEP 5
Connect the Handlebar wire (25) and the Extended
Wire (15) to the wires of the console (29), then
attach the console (29) onto the console bracket
of the upright post (17) with the screw (27), and
then attach the Tablet Holder (20) to the back of
console (29) with screw (21).
STEP 6
A: Assemble the horizontal post(18) to the saddle
post (31) and fasten the flat washer (33) and pop
pin nut (32), and then insert the saddle (19) to the
post of the horizontal post(18) and fasten it .
B:Insert the saddle post (31) which fixed with the
saddle (19) into the post of the main frame (1),
and adjust the length then tighten them with the
pop pin knob(30).
Please make sure the saddle (19) is tighten on
the horizontal post(18).
Now, your machine is ready for use.
7