Checking The Swingarm; Checking The Routing Of The Throttle Cable - KTM 125 EXC 2016 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.39

Checking the swingarm

12.40

Checking the routing of the throttle cable

–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401341-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
(All 125/200 models)
–
Check the routing of the throttle cable.
The throttle cable must be routed behind the handlebar, on the right of the
upper frame tube, and to the carburetor.
» If the throttle cable is not routed as specified:
–
102284-10
(All 250/300 models)
–
Check the routing of the throttle cable.
The throttle cable must be routed behind the handlebar, on the right of the
upper frame tube, and to the carburetor.
» If the throttle cable is not routed as specified:
–
102285-10
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by KTM.
p. 66)
( p. 70)
Correct the routing of the throttle cable.
Correct the routing of the throttle cable.
( p. 71)
p. 66)
76