Service Work On The Chassis; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - KTM 125 EXC 2016 Owner's Manual

12

SERVICE WORK ON THE CHASSIS

12.1

Raising the motorcycle with a lift stand

12.2

Removing the motorcycle from the lift stand

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
12.3

Bleeding the fork legs

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with the
rubber band.
401943-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
(EXC EU/AU)
–
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
102259-10
(200 XC‑W US, 250 XC‑W US, 300 EXC BR, 300 XC‑W US)
–
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
102260-10

to the ground with your foot and lean
p. 52)

.

.
52