Preparing For Rides On Dry Sand; Preparing For Rides On Wet Sand - KTM 125 EXC 2016 Owner's Manual

8 PREPARING FOR USE
8.4

Preparing for rides on dry sand

8.5

Preparing for rides on wet sand

–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the required value:
600872-10
–
Change the radiator cap.
–
Fit a dust cover on the air filter.
Dust cover for air filter (59006019000)
Info
See the KTM PowerParts fitting instructions.
600869-01
–
Fit a sand cover on the air filter.
Sand cover for air filter (59006022000)
Info
See the KTM PowerParts fitting instructions.
–
Adjust the carburetor jetting and setting.
Info
600871-01
Your authorized KTM workshop can recommend the right carburetor tuning.
–
Clean the chain.
Chain cleaner (
–
Fit the steel sprocket.
Tip
Do not grease the chain.
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
600868-01
Condition
Regular use in sand
–
Change the piston every 10 operating hours.
–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the required value:
600872-10
Warning
Danger of scalding During motorcycle operation, the coolant gets
very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling
system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse
immediately with lukewarm water.
p. 143)
Warning
Danger of scalding During motorcycle operation, the coolant gets
very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling
system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse
immediately with lukewarm water.
1.8 bar (26 psi)
1.8 bar (26 psi)
32