Titan TTLMP300SP40 Manual page 6

Safety information
Description of signal words:
The signal word that indicates a hazard with a high level of risk
DANGER!
which, if not avoided, will result in death or serious injury.
The signal word that indicates a hazard with a medium level of
WARNING!
risk which, if not avoided, could result in death or serious injury.
The signal word that indicates a hazard with a low level of risk
CAUTION!
which, if not avoided, could result in minor or moderate injury.
NOTE! Indicates a practical tip, advice or practice not related to
personal injury.
Lock/to tighten or secure.
Unlock/to loosen.
Note/Remark.
Caution/Warning.
Read the instruction manual.
Mow across the face of slopes, never up and down.
Do not expose the product to rain or wet conditions.
Open flames in the work area, around the product and in the vicinity
of flammable materials are prohibited!
Do not smoke in the work area, around the product and in the vicinity
of flammable materials!
Risk of fire/flammable materials.
10
TTLMP300SP40
Wear respiratory protection.
Wear hearing protection.
Wear eye protection.
Wear protective gloves
(compliant to EN ISO 21420)
Wear protective, slip-resistant
safety footwear
(compliant to EN ISO 20345)
Wear tight-fitted protective
clothing (compliant to
EN ISO 13688)
TTLMP300SP40
Hot surface, do not touch! High temperatures on the product's surfaces
and structural parts that could cause burns, if they are touched. The
product can also stay hot for a longer period of time after the operation!
Petrol engines produce toxic carbon monoxide exhaust fumes.
Breathing carbon monoxide can cause nausea, fainting or even death.
Do not operate the engine indoors!
Only refuel unleaded petrol!
Add engine oil.
Check and refill oil.
Stop the engine before refuelling the fuel tank. Flammable material.
Keep away from fire. Do not add fuel with a running engine.
Inspect the area where the product is to be used and remove all
objects which can be thrown by the product. If objects are hidden
while operating, stop the engine and remove the objects.
Prevent engine malfunction by checking the engine oil level regularly.
Keep hands and feet away from sharp rotating parts – risk of injury! When
cleaning, repairing or inspecting, make sure the cutting means and all
moving parts have stopped. Disconnect the spark plug connector, and
keep the cap away from the plug to prevent accidental starting.
Cutting means continues to rotate after the engine is stopped. Wait until
all components have completely stopped before touching the product.
Pay particular attention when working on the blades!
Safety information
11