Maintenance Procedure - AMS Neve Libra Live II Series User Manual

Issue 4

Maintenance Procedure

This procedure is recommended if any software updates or any custom configurations have been
put on the system in order to maintain your ghost copy. The procedure for copying software and
custom configurations is as follows:
Insert the floppy disk labelled SFT,ENC,009 Windows Boot Disk into the floppy disk drive.
Insert the blank formatted Zip Disk into the Zip drive.
Restart the computer.
Select Shutdown from the Start Menu, select Shutdown & Restart, then click OK.
Otherwise, press Ctrl-Alt-Del.
The System will boot up from the floppy disk.
You will be asked to confirm the type of Zip drive fitted. On systems the Zip drive is IDE.
Press I [Enter] to confirm.
You will be asked to confirm or cancel the Lock command.
Press N [Enter] to cancel the Lock command.
The Lock command will have no effect at present, because either the hard disk is new (and
therefore blank) or the hard disk is still formatted with NTFS (the Lock command works with DOS
FAT16 partitions).
The A: prompt will appear.
At the A: prompt type ghost [Enter].
The Norton Ghost initial screen appears.
Click on the OK box.
In the drop down menu
Go to Local, move across to Disk and click on To Image.
A box will appear.
Make sure that Drive 1 is highlighted.
Click OK.
Select Drive C: (Zip Drive 100) from the drop down box.
Type in the filename Backup.GHO.
Click Save or press [Enter].
You will be asked if you want to Compress Image File.
Select High.
You will be prompted to Proceed with Image File.
Click Yes.
The Process Indicator screen will appear.
If the Boot hard disk contains additional data added by the user, more than one Zip disk may be
needed to complete the procedure.
You will be prompted to insert another disk if required.
Click Yes followed by OK.
This will now continue until complete.
Libra Live Series II User Manual
238 Maintenance