Assignable Buttons Preferences - AMS Neve Libra Live II Series User Manual

Issue 4
Invert AFT
This toggles the input sense of the GPI opto inputs so that a low-level signal activates the AFT
inputs rather than a high level signal.
Invert On/Cut
This toggles the input sense of the GPI opto inputs so that a low-level signal activates the
ON/CUT switch function rather than a high level signal.

Assignable Buttons Preferences

This page allows three buttons (L/A, R/B and the AMS Neve logo) on each fader strip to be
assigned to user selectable functions. The list of functions may expand as new software is
introduced.
Checking the Separate Mono/Stereo checkbox allows the assignable buttons on mono and stereo
channels to be assigned to different functions.
The left button can be assigned to the following functions:
Left i/p only
GPI switch relay
Insert 1 divert
Pre/post route
nd
PFL 2 layer
The Other (logo) Button can be assigned to:
GPI fader relay
Mix Minus Talkback
GPI fader relay
Mix Minus Talkback
Insert 2 divert
AFT Control
Not defined
GPI switch relay
Phase Switch
99
Libra Live Series II User Manual
Using Encore