Resetting Console Controls With Reset Wizard - AMS Neve Libra Live II Series User Manual

Issue 4
Press the ACCESS key for the path containing the required control settings.
The dialogue box will be replaced by the capture Scope dialogue box with the All (Current Page
Only!) radio button selected.
This means that the values for controls on the current Defaults Manager page will be capture (e.g.
all the EQ settings).
To capture the settings for the current page
Click on OK.
or
To capture a selected range of controls.
Click the Select Controls (Touch Activated. Valid for all pages) radio button.
Touch the required controls on the AFU.
Any controls for which there are settings in Defaults Manager can be selected.
The list box in the capture Scope dialogue box will show the selected controls.
Click an item in the list and click the Remove button if a control is incorrectly selected.
Click on OK to execute the capture.
To copy the current page of default settings to other path types
Click the Copy button.
The Copy dialogue box will appear.
Click the check boxes for the path types to copy the settings to.
Click OK.

Resetting Console controls with Reset Wizard

To reset controls on the console surface to the settings in Defaults Manager
Click the Reset Wizard button.
The paths page of the Reset Wizard will appear.
Click the radio buttons next to the path types to show the required paths.
Click the check boxes next to the path names to select the required paths.
Click the Select All button to select all the currently listed paths.
Click the Clear All button to de-select all the currently listed paths.
Click the Next> button.
At least one path must be selected before you can go to the next page, otherwise there is
nothing to reset and a dialogue box will indicate this.
The controls page of the Reset Wizard will appear.
Click the check boxes for the required controls.
Click the Select All button to select all the controls.
Libra Live Series II User Manual
168 Using Encore