Defaults Manager; Setting Values In Defaults Manager - AMS Neve Libra Live II Series User Manual

Issue 4

Defaults Manager

Defaults Manager is used to set the default values for all
controls when a new console is configured (e.g. the default
frequency for the first band of EQ). The Reset wizard in
Defaults Manager can also be used to reset selected (or all)
controls on selected (or all) channels across the console.
Different sets of defaults can be created, saved and loaded as required. A set of defaults is
associated with the each desk setup (console configuration).
Defaults Manager is accessed by clicking on the Defaults Manager icon or from the Filing utility
(see the System Menu section under Filing).

Setting Values in Defaults Manager

To set default values
Click on the EQ, Filter, Dynamics, Input/Output, Miscellaneous or Aux Routing tab.
The selected page will be displayed.
Click the up/down buttons at the end of a box containing a required parameter.
or
Click in the box showing the value and edit it using the Encore keyboard.
To set a processing element to be switched on as soon as it is allocated
Click the OFF button for the required element.
The button will be 'pressed in' and the button legend will change to ON.
To set values from existing control settings
Click the Capture button.
A dialogue box will appear requesting an ACCESS key to be pressed.
Libra Live Series II User Manual
167 Using Encore