Table of Contents
Advertisement
66
1-1. For safe use
2
Place the child restraint sys-
tem on the second or third
seat facing the front of the
vehicle.
3
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
4
Fully extend the shoulder
strap and then allow it to
retract slightly into the ALR
lock mode.
Lock mode allows the seat belt
to retract only.
5
While
restraint system into the seat,
allow the shoulder belt to
retract until the child restraint
system is securely in place.
After the shoulder belt has
retracted to a point where there
is no slack in the belt, pull the
belt to check that it cannot be
extended.
6
If the child restraint system has a top tether strap, the top tether
strap should be latched onto the top tether strap anchor.
(→P. 68)
LC200_OM_OM60Q26U_(U)
pushing
the
child
Advertisement
Table of Contents
