Table of Contents
Advertisement
342
4-5. Using the driving support systems
● Projected course lines
Projected course lines are displayed under the assumption that
the vehicle is on a flat road surface. Therefore, the position of
three-dimensional objects higher than the road surface (such as
a vehicle bumper) cannot be determined. Even if it seems that an
obstacle is outside of the projected course lines and a collision
will not occur according to the screen, an obstacle may actually
be in the vehicle course, resulting in a collision.
1
Projected course lines
Three-dimensional objects in high positions (such as walls with
protrusions or the loading areas of trucks) may not be displayed
on the screen. Confirm the safety of your surroundings directly.
1
Protrusion of a wall
LC200_OM_OM60Q26U_(U)
Advertisement
Table of Contents
